Sensoray 2518 Bedienungsanleitung PDF herunterladen (Seite 14)

Sensoray Model 2518/2519 Ethernet Smart A/D™ 11 Configuration

The following table shows the mapping between

channels and affiliated shunt pairs for SCC enables.

Example:

To enable the SCC for sensor channel 2, install shunts

E11 and E19 on the lower Smart A/D™ board.

Example:

To disable the SCC for sensor channel 14, remove

shunts E15 and E23 on the upper Smart A/D™ board.

4.3.7 Default SCC Configuration

Models 2518 and 2519 are factory programmed so that

the SCCs for all sensor channels are disabled. Shunts E9

through E24 are all removed as shipped from Sensoray.

Table 4: Signal Conditioner shunt mapping

Channel

518 Board

Lower 0 1 2 3 4 5 6 7

Upper 8 9 10 11 12 13 14 15

Shunt

Numbers

E9 E10 E11 E12 E13 E14 E15 E16

E17 E18 E19 E20 E21 E22 E23 E24

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 29 30

Keine Kommentare

Sensoray 2518 Bedienungsanleitung Seite 14