Sensoray 327 Bedienungsanleitung PDF herunterladen (Seite 4)

Sensoray Model 327 Instruction Manual 5

1. Introduction

Sensoray’s Model 327 PCI to PC104-Plus Adapter allows testing PCI boards using the PC104-Plus bus

system. PCI board can be placed in the PC104-plus stack, in a parallel plane to the board. This position

allows make a compact package. Custom hold-down bracket secures PCI plug-in board in the slot. The

PCI slot can be configured as slot 1, 2, 3 or 4, using removable jumper plugs.

2. Specifications

Parameter Specification

Bus PC104-Plus to 32-bit PCI

Slot configuration Slot 1 to 4, jumper plugs

PCI board mounting Standard 32-bit PCI right angle Connector, custom bracket

Dimensions 5 x 3-5/8 inches

Operating temperature

-40°C to +85°C

3. Installation

3.1. Installation

Power down the PC104-Plus system. Plug the Model 327 adapter into a PC104-plus slot. Configure

adapter for slot1 to4 (follow instructions). Plug in the board under test into the 327 adapter and attach

custom hold-down bracket. Power up the PC104-Plus system.

3.2. Configuration

Each module in PC104-Plus system shall be properly configured to prevent conflicts. The following

table shows the appropriate jumper setting and signals used for each module in the stack.

Example: For Slot1 install jumpers IDSEL0, REQ0, GNT0, CLK0 , INTA only,

For Slot2 install jumpers IDSEL1, REQ1, GNT1, CLK1 , INTB only.

MODULE SLOT SELECTION JUMPERS

1 IDSEL0 REQ0 GNT0 CLK0 INTA

2 IDSEL1 REQ1 GNT1 CLK1 INTB

3 IDSEL2 REQ2* GNT2* CLK2 INTC

4 IDSEL3 REQ2* GNT2* CLK3 INTD

* NOTE1: Because module slots 3 and 4 share REQ2/GNT2, they cannot both be master devices.

4. Technical Support

For technical support contact Sensoray Company, Inc.

Tel: (503) 684-8005

Fax: (503) 684-8164

http://www.sensoray.com

1 2 3 4 5

Keine Kommentare

Sensoray 327 Bedienungsanleitung Seite 4