Sensoray 811 Bedienungsanleitung PDF herunterladen (Seite 11)

Full A/V (Video & Audio) and Digital I/O Connector: J9

Pin Signal Pin Signal

1 Analog Ground 2 Composite Video In / S-Video In – Y

for Channel-1

3 S-Video In – C for Channel-1 4 Audio In – L for Channel-1

5 Audio In – R for Channel-1 6 Digital Input for Channel-1

7 Digital Output for Channel-1 8 Digital Ground

9 Analog Ground 10 Composite Video In / S-Video In – Y

for Channel-2

11 S-Video In – C for Channel-2 12 Audio In – L for Channel-2

13 Audio In – R for Channel-2 14 Digital Input for Channel-2

15 Digital Output for Channel-2 16 Digital Ground

17 Analog Ground 18 Composite Video In / S-Video In – Y

for Channel-3

19 S-Video In – C for Channel-3 20 Audio In – L for Channel-3

21 Audio In – R for Channel-3 22 Digital Input for Channel-3

23 Digital Output for Channel-3 24 Digital Ground

25 Analog Ground 26 Composite Video In / S-Video In – Y

for Channel-4

27 S-Video In – C for Channel-4 28 Audio In – L for Channel-4

29 Audio In – R for Channel-4 30 Digital Input for Channel-4

31 Digital Output for Channel-4 32 Digital Ground

33 +3.3V 24 Not Used

Digital I/O Connectors: TB1 ~ TB5

TB Signal

1 GPIO1 – Digital Input/Output for Channel-1

2 GPIO2 – Digital Input/Output for Channel-2

3 GPIO3 – Digital Input/Output for Channel-3

4 GPIO4 – Digital Input/Output for Channel-4

5 Digital ground

DIP Switches

Manufacturing DIP Switch: SW1

The DIP switch, SW1, is used for manufacturing only. Therefore, it is not described in

this manual.

Digital I/O Configuration DIP Switch: SW2

The DIP switch, SW2, is used for configuring Digital I/O routing. Refer to the table

below for the routing details:

1 2 ... 6 7 8 9 10 11 12 13 14 15

Keine Kommentare

Sensoray 811 Bedienungsanleitung Seite 11