Sensoray 817 Bedienungsanleitung PDF herunterladen (Seite 14)

An array of 4 integers. Each member of

switchOut

defines an input video channel

connected to the corresponding output video channel. For example, setting

switchOut[2]

to 5 connects video input 5 to video output 2

S817_SetVideoOut

ECODE S817_SetVideoOut(int board, unsigned int outEn)

Controls the output switch of the analog video crosspoint switch. This feature allows

connecting outputs from multiple boards to the same video monitor (in parallel).

board

Index of the board being addressed (1 ..

SYS_MAXBOARDS

outEn

Four lower bits of this parameter control the output switches of the video crosspoint

switch. Bit 0 controls output 0, bit 1 controls output 1, etc. Setting a bit to 1 closes the

switch (connects the signal to the output connector of the 817 board). Setting a bit to 0

opens (disconnects) the switch.

S817_SetDateTime

ECODE S817_SetDateTime(int board)

Copies system date and time settings from the host to the board. The date and/or

time values may be used for on screen display (OSD).

board

Index of the board being addressed (1 ..

SYS_MAXBOARDS

S817_SetOsdMode

ECODE S817_SetOsdMode(int board, int aChan, OSD_MODE *osd)

Controls OSD mode for a selected input channel.

board

Index of the board being addressed (1 ..

SYS_MAXBOARDS

aChan

Index of the input video channel being addressed (1 .. 16).

osd

Pointer to OSD_MODE structure.

1 2 ... 9 10 11 12 13 14 15 16 17 18

Keine Kommentare

Sensoray 817 Bedienungsanleitung Seite 14